Three Phase Asynchronous Induction Motor with Ie1 Ie2 Ie3 Ie4 Aluminum Casing IEC ISO9001 CE

Basic Info.

Model NO.	MS IE2 Y2 yc
Starting Mode	Direct on-line Starting
Certification	ISO9001, CCC
Brand	Gogogo Motor
Volt	220V 230V 240V 380V 400V 415V 440V 460V 575V 660V
Work Duty	S1,S2,S3
Housing Material	Cast Iron,Aluminum,Steel.,Stainless Steel
Power	0.37kw-400kw
Model	Y Y2 Ys Ms Yb2 Yb3 Yej Yvp
Output	1HP-460HP
Standard	IEC,Epact UL,GOST,DIN Bsi
Rpm	740rpm 960rpm 1100rpm 1400rpm 1750 Rpm 2800rpm
Mount Type	B3,B14,B5,B35 B34,C Face
Winding	Copper Wire
Protection Class	IP22 IP44 IP54 IP55 IP56 IP66
Insulation Class	E,B,F,H
Frequency	50Hz 60Hz
Transport Package	Carton/Woodencase/Plywood Case
Specification	2pole 4pole 6pole 8pole 10pole
Trademark	GOGOGO MOTOR
Origin	China
HS Code	8501520000
Production Capacity	200000PCS/Year

Product Description

We,GOGOGO Mechanical&Electrical Co.,Ltd specialize in high quality energy-efficient electric motors. The combination of the best available materials, high quality sheet metal and the right amount of copper in the rotor/stator makes GOGOGO's electric motors highly energy-efficient.
We design our electric motors to fit and match our customer's requirements at our production site. The electric motors can be supplemented with a range of options and accessories or modified with a special design to endure any environment.

Electric motors account for a large part of the electricity used. If we look at the world, electric motors account for about 65 percent of the electricity used in industry. To reduce this use of electricity, there are legal requirements regarding the efficiency of electric motors manufactured in the EU, or exported into the EU.

Three-phase, single-speed asynchronous motors are covered by the requirements today. Asynchronous motors are the most common type of motor and account for 90 percent of the electricity consumption of all electric motors in the power range 0.75 - 375 kW.

According to that standard, the energy efficiency classes have the designations IE1, IE2, IE3 and IE4, where IE4 has the highest efficiency.

Three Phase Electric Motor Characteristics and advantages:
Frame Size:	H56mm-200mm
Rated Power:	0.09KW-22KW
Poles:	2, 4, 6, 8, 10poles
Rated Voltage:	220/380V, 380/660V, 230/400V, 400V/690V
Frequency:	50HZ, 60HZ
Protection Class:	IP44, IP54, IP55, IP56
Insulation Class:	B, F, H
Mounting Type:	B3, B5, B35,B14,B34 multi and pad mounting
Ambient Temperature:	-20~+40 °C
Altitude:	≤1000M

Revision of the standard

A revision of the standard was decided by the Ecodesign Committee in 2019. The revision was published on October 1, 2019. The following will apply:

For electric motors

From July 1, 2021

2-, 4-, 6- and 8-pole motors from 0.75 - 1000 kW (previously up to 375kW) are included in efficiency class IE3.

Motors within the range 0.12 - 0.75 kW must meet efficiency class IE2.

The previous possibility to replace IE3 motors with an IE2 motor with frequency drive disappears.

For 2-, 4-, 6- and 8-pole motors from 0.12 - 1000 kW, the efficiency class IE2 now also applies to Ex eb certified motors with high safety.

Single phase motors with greater power than 0.12 kW are covered by the corresponding IE2 class.

The higher efficiency class IE4 applies to 2, 4 and 6-pole motors between 75 - 200 kW.

For frequency inverters

From July 1, 2021

For use with electric motors with power from 0.12 - 1000 kW, the frequency inverter must pass efficiency class IE2 specially designed for inverters.

Current requirements according to the Directive

Since 16 June, 2011 it is prohibited to place electric motors below energy efficiency class IE2 on the market, or to put them into service in the EU.

Since January 1, 2015, electric motors within the range 7.5 - 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if the latter is combined with frequency inverters for speed control. The legal requirement thus provides two options.

From January 1, 2017, the requirements were tightened so that all motors 0.75 - 375 kW (2-, 4-, and 6-pole) must meet the requirements for IE3, or IE2 if they are combined with frequency inverters.

Exemptions from the current directive

• Operation other than S1 (continuous drive) or S3 (intermittent drive) with a nominal cyclicity factor of 80 percent or lower.
• Made for assembly with frequency inverters (integral motors).
• Electric motors made for use in liquid.
• Electric motors that are fully integrated into a product (e.g. a gear, pump, fan or compressor) where the energy performance is not tested independently of the product.
• Brake motors

Electric motors intended for operation exclusively:

• At altitudes exceeding 4 000 meters above sea level.
• If ambient air temperatures exceed 60°C.
• Where maximum operating temperature exceeds 400°C.
• Where ambient air temperatures are less than -30°C for all motors, or less than 0°C for motors with water cooling.
• In explosive atmospheres (as defined in Directive 94/9 / EC 9)

The requirements do not apply to ships or other means of transport that carry goods or persons, since there must be specially designed engines for this purpose. (If the same mobile conveyor belt is used on ships as well as on land, the rules apply).

Also, the requirements do not apply to repair of motors previously placed on the market, or put into service - unless the repair is so extensive that the product will in practice be brand new.

If the motor is to be further exported for use outside Europe, the requirements do not apply.

Some other requirements apply to water-cooled motors
We are specialized in all kinds of small and middle-sized electric motors.our main products include electric motors of Y series,Y2/YE2 series,YS/MS series of Three Phase Asynchronous motor;YC series,YL series,MY/ML series,JY series of Single Phase motors etc.They are widely used in machine tool, fans, pumps, compressors, packaging machinery, mining machinery, construction machinery, food machinery and other mechanical transmission device. We have obtained ISO90001-2008 quality certificate, CE certificate and CCC certificate.Our products are widely exported to over fifty countries and regions,such as east Europe,Southeast Asia,South America,Middle East,Africa etc.Meanwhile,we have kept well touch with many trading companies at home and abroad for cooperation relationship. "Reliable quality, Excellent service, Reasonable price, Timely delivery" is our company persistent pursuit.Looking forward to be your long term business partner.
IE2 Series Cast Iron Three Phase Induction Motor is specially designed for European market, whose terminal box is located on the top of motor.They are totally enclosed and fan-cooling designed. They are newly designed in conformity with the relevant requirements / rules of IEC standards.For the Connection Model of 2p 4p 6p 8p Y2 motor, please refer to the Name Plate on the motor (The Y Connection is adopted by motors' Output equal or below 3kW; The Delta-Connection is adopted by motors' Output above 4kW).

Power:	0.55kw-315kw	Voltage:	380/415/440V( can can done as your need)
Frequency:	50/60hz	Enamelled Wire:	Copper Wire (Can Done Aluminum wire as Your Need)
Insulation Class:	F	Mounting Way:	B3 Foot /B5 Flange /B35 Foot and Flange
Protection Grade:	IP55	motor body :	cast iron body of ac motor

> Applications
General place and machine without special requirments, for example: machine tools, pumps, fans, transport machinery, mixer, agriculture machinery, food machines, agitator, air compressor etc. We also can supply aluminum housing type for frame size under the standard of IEC.

> Our Electric Motor Advantages
1. Great quality of materials(Cold silicon steel/100% copper wire/ Aluminum frame)2.Colorful wiring3.Clear nameplate4.Reliable package5.High efficiency, low noise6.Best materials make best performance

We have our own design and development team, we can provide customers with standard AC electric motors, We can also customize the single phase/three phase motors according to the special needs of customers. Currently our main motor products cover three - phase high - efficiency motors,general three - phase motors, single phase motors, etc.
The main motor ranges: IE3 / YE3, IE2 / YE2, IE1 / Y2, Y, YS, MS, YC, YL, YY, MC, MY, ML motors.
American standard NEMA motors
Russian standard GOST ANP motors
Taiwan type AEEF motors,YC motors
Why choose us?
Guarantee of our motors:18-24months
General elivery time:15-30days
Price of motors: Most reasonable during your all suppliers
Packing:Strong export cartons/wooden case/plywood cases/pallets
Payment way with your order: T/T,LC,DP,etc
Sample order: Acceptable
Shipment way: Sea ship,Air flight,Express way,Land transfer way.
If you are looking for new better supplier or purchase electric motors, please feel free contact us now.You will get all what you want.